Warning: Undefined array key "HTTP_REFERER" in C:\wwwdev_Jooomla5.1\components\com_product\ProductRefDesignDetailImpl.php on line 4
Deprecated: explode(): Passing null to parameter #2 ($string) of type string is deprecated in C:\wwwdev_Jooomla5.1\components\com_product\ProductRefDesignDetailImpl.php on line 5
Zilog’s ZMOTION Occupancy Sensor Reference Design Kit is a complete and easy-to-use system that demonstrates the use of its ZMOTION microcontroller and key IXYS components as a passive infrared (PIR) sensor-based motion detector lighting system that can operate in two modes – Occupancy Mode and Vacancy Mode. Both modes can use either PWM or 1–10 V interfaces to control dimmable lighting ballasts. These ballasts typically drive fluorescent/compact fluorescent (CFL), High Intensity Discharge (HID), or High Power LED lighting. A DIP switch is used to select features and modes such as sensitivity, delay time, dim level, pass through mode, vacancy mode, and occupancy mode. Ambient light detection, AC power control, and certain advanced features offered by ZMOTION, such as Pass Through and Hyper Sense, are also supported.
Features
Uses the ZMOTION MCU (part number Z8FS040BHH20EG) to perform all motion detection and output control
1–10V output with voltage feedback and fault detection (can support up to 25 ballasts)
PWM output
AC switch supporting 3 A/220 VAC load
Ambient light sensor with light gate adjustment
Occupancy and Vacancy modes
Pass Through and Hyper Sense detection
Programmable output level for unoccupied state
Dimming control of light output level
LED indicator (for motion detection and external wiring fault detection)
Push button to toggle light output (manual override)
9-position DIP switch for configuration of parameters
Supports ZMOTION L200 development kit lenses
USB serial interface for debugging
The ZMOTION Occupancy Sensor Reference Design Kit contains*: